Plastic wheel axle 9.5mm high

Wheel axle for upgrading the older models of the Flaschenfee.

These wheel axles are stronger than the old ones, but they increase the width of the Flaschenfee by 1cm.

So only buy these wheel axles if you are sure that the flaschenfee still fits into your diswasher.

These wheel axles are not(!) a spare part for the newer models of the Flaschenfee which have wheel axles with screw by standard.

Only use these wheel axles for 33mm wheels.

Wheel axle to be screwed on to the base plate. The ball-bearing mounted wheel simply clipped on after screwing.

The wheel axle is suitable for smaller wheels with an outer diameter of 33mm. This requires countersunk head screws M6 x 14.