No results were found for the filter!
Plastic wheel axle 9.5mm high Wheel axle to be screwed on to the base plate. The ball-bearing mounted wheel simply clipped on after screwing. The wheel axle is suitable for smaller wheels with an outer diameter of 33mm. This requires countersunk head screws M6 x 14.
€3.29 *
Wheel axle for V-Zug machines Wheel axle to be screwed on to the base plate. The ball-bearing mounted wheel simply clipped on after screwing. The wheel axle is suitable for smaller wheels with an outer diameter of 33mm. This requires countersunk head screws M6 x 14.
€3.49 *
Plastic wheel axle 9.5mm high Wheel axle for upgrading the older models of the Flaschenfee. These wheel axles are stronger than the old ones, but they increase the width of the Flaschenfee by 1cm. So only buy these wheel axles if you are sure that the flaschenfee...
€5.99 *
Plastic wheel axle 9.5mm high Wheel axle to be screwed on to the base plate. The ball-bearing mounted wheel simply clipped on after screwing. The wheel axle is suitable for smaller wheels with an outer diameter of 33mm. This requires countersunk head screws M6 x 14.
€3.29 *
Viewed
